Skip to content
English

Cart

Your cart is empty

OUR PAPERS

Non-woven

OUR CLASSIC

Non-woven

Finish:
Ultra matte
Recommended for:
Living spaces (bedroom, living room, office…)
Our standard paper has a smooth, velvety, ultra-matte finish for residential interiors. PVC-free, FSC certified and formaldehyde-free.
Hanging instructions
Pre-pasted non-woven

EASY TO HANG

Pre-pasted non-woven

Finish:
Ultra matte
Recommended for:
Living spaces (bedroom, living room, office…)
Our pre-pasted non-woven paper is activated by spraying water onto the back for easier hanging.
Hanging instructions
High Performance Contract

DURABLE & WASHABLE

High Performance Contract

Finish:
Impact-resistant and waterproof
Recommended for:
Wet areas (bathroom, kitchen…) and professional spaces
Designed for busy spaces, this reinforced paper is washable and impact-resistant. PVC-free, FSC and UL Greenguard Gold certified.
Hanging instructions
Sisal

TEXTURED

Sisal

Finish:
Natural texture
Recommended for:
Living spaces (bedroom, living room, office…)
Made from natural agave fibres, sisal adds a warm, organic texture to our wallpapers. Available for selected designs.
Hanging instructions
COMPARE ALL MATERIALS

BEFORE / AFTER

Imagine this design in your home

Drag the slider to reveal the transformation.
Pacifico XL Sample — AVANT BEFORE
Pacifico XL Sample — APRÈS AFTER
Move the comparison
Room illustration: the colour and crop may differ from your selection.

INSTALLATION

Hang your wallpaper, step by step

Choose your format and paper, then open a step to read the instructions.

  1. The package contains one roll with the drops placed one after another and numbered in hanging order, separated by dotted lines.

  2. The package contains several drops rolled together, along with a hanging plan for your bespoke design.

  3. The package contains a 10 m roll of your pattern.

  4. Fill any holes, sand and remove dust. Mark a vertical guide using a plumb line or laser level so that the first drop hangs perfectly straight.

  5. Cut the drops along the dotted lines, then lay them on the floor in hanging order.

    Measure the wall height and allow an extra 5 cm at the top and bottom for final trimming. Position the mural to achieve your preferred crop, then check the joins before hanging.

  6. No cutting is needed to separate the drops: each one is numbered and hangs from left to right. Lay the complete design on the floor to see the whole picture before starting.

  7. Measure the wall height and allow an extra 5 cm at the top and bottom for trimming. Position the pattern to achieve the desired result, then check the joins before hanging.

  8. Paste the wall section by section, covering an area slightly wider than the drop. Use a specialist paste suitable for your chosen paper and work in even strips.

    View wallpaper paste

  9. Thoroughly wet the entire back of the wallpaper with water, including the edges, to activate the adhesive.

  10. Hang the first drop along your vertical guide, then smooth from the centre towards the edges to remove air bubbles. Hang the next drops edge to edge without overlapping, then trim the excess at the top and bottom with a craft knife and ruler.

  11. Hang the first drop along your vertical guide, then smooth from the centre towards the edges to remove air bubbles. Hang the next drops edge to edge without overlapping, carefully matching the pattern. Finally, trim the excess at the top and bottom with a craft knife and ruler.

Download the full guide (PDF) Download the full guide (PDF)

RECENTLY VIEWED

Recently viewed